welcome,guest
Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2017-12-17 01:43
68
Fiber type | SM, MM, DS, NZDS | |||||
Splice loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) | |||||
Return loss | Better than 60dB | |||||
Operation mode | Full-automatic, semi-automatic, manual | |||||
Fiber alignment | Advanced PAS aligning | |||||
Applicable fibers | Bow-type, SCconnector (optional) and 0.25mm, 0.9mmordinary optical fibers | |||||
Cleave length | 8~16mm | |||||
Magnification | 304/152times | |||||
Display | High-performance 5.7 inch LCD; provide clear and exquisiteimage display | |||||
Tension test | Standard 2N(optional) | |||||
Pyrocondensation tube | 60mm, 40mmand a series of pyrocondensationtubes | |||||
Battery capability | Typical 320 splices; charging time: about 3.5 hours (available for use during charging) | |||||
Battery life | 300~500 times of charging, can be exchanged by users | |||||
Electrode life | Typical value: 4000 times; can be exchanged by users | |||||
Construction lighting |
Built-in high-brightness, wide-range light, convenient for night operation. | |||||
Power supply | Built-in lithium battery: 11.1V; external adapter, input: AC100-240V, output: DC13.5V/4.5A | |||||
Operating environment |
Temperature: -10℃~+50℃; humidity: 0~95%RH(non-condensing) Altitude height: 0~5000m |
|||||
Weight | 2.7kg(without battery), 3.2kg(with battery) | |||||
Operation interface | Chinese/English | |||||
Dimensions | W×H×D=150mm×140mm×160mm | |||||
Max. power | ≤20W(without charging); ≤55W(with charging) | |||||
DC internal power | Service time (23C±2C) |
≥4h (continuous working) | ||||
≥10h(standby state) | ||||||
Charging time |
≤3.5h(power off) | |||||
≤4.5h(power on) | ||||||
DC external power(external power adapter) | Input | 100~240V, 50/60Hz | ||||
Output | 13~14V, ≥4.4A, power plug center is positive pole | |||||
Leakage current | When the input voltage is 220V, leakage current ≤3.5mA | |||||
Interface function | USB | Storage record |
No Udisk | “Please insert a U disk”prompt | ||
With U disk | To export the record. There will be a prompt of “please pull out the U disk”after finished. | |||||
Software upgrading |
With U disk, during the software upgrading, there will be a progress bar, and the upgrading will be completed in few seconds. Pull out the U disk, and re-start the instrument, the software version showed on the interface should be the same as in the U disk. | |||||
VGA | To link the external monitor via VGA port, so that the monitor can display the content on the fusion splicer screen. | |||||
Automatic splicing |
Can completethe gap setting, alignment and dischargesplicing of two fibers as well as the displayof estimated loss. | |||||
Tension test | During operation, the tension (1.96N) test will be automatically startedonce the splicing is finished. It will display “normal”once the tension test is finished. | |||||
Automatic heating | When starting up, the heating function is automatically activatedwith no need to press “heating”key. The heatingindicator lights up and complete the pyrocondensation of a 60mm standard pyrocondensationtube. | |||||
Performance indexes | Splicing time | Splicing time≤9s | ||||
Heating time | 40mmpyrocondensationtube | Heating time≤30s | ||||
60mmpyrocondensationtube | Heating time≤35s |